Print
Discovery Telecom
Advanced Telecom Systems.
SIGINT and defense equipment
Tel./Fax: +358 9 31587490
E-mail: sales@discoverytelecom.fi

DT-MMS. Powerful 16 BTS SDR IMSI catcher for vehicle

MMS-CATCHER
MMS-CATCHER

Main characteristics		  
Vendor Intercept
Category IMSI Catchers
Standart 5G (NR)/NSA - 4G (LTE)/2600/1800/2300/800/700 - 3G (UMTS)/850 /900/1700 /1900/2100 - 2G (GSM)/900/1800/850/1900 - CDMA/450/800/1900 - WiFi/5000 - GPS - Bluetooth
Frequency 400MHz - 6GHz
System output up to 200W
Power source 22V - 34V DC
Active range (m) 1000
Installation In the vehicle, stationary
Processor Freescale i.MX6 ARM Cortex-A9, Quad core processor, 1 GHz each core
OS Windows 7, 10, Androide
Battery Li 11,5x4x6 cm, 300g
Max. hold time ~6 hours
Max. working time ~2 hours
Antenna Directional or omnidirectional
Q'ty of channels 16
Connectors USB; RJ-45
Interface 802.1Q VLAN support for 4096 VLAN IDs; Port based VLAN routing
Management API, IP
Delivery set Sender, Laptop, Antenna, S\W
Dimensions, HWD 350 x 330 x 120 mm
Weight 25 kg
Shipment Free worldwide

The main functions and characteristics

Multi-BTS, Multi-Band High Power IMSI catcher

  • MORE POWER AND DISTANCE
  • WIRELESS NETWORK MONITORING & SCANNING 
  • FREQUENCY AGNOSTIC – FROM 400MHZ TO 4GHZ 
  • FLEXIBLE CONFIGURATION - UP TO 16 RADIOS
  • 5G/LTE/UMTS/GSM/CDMA2000
DT-MMS in vehicle, IMSI catcher in vehicle

The DT-MMS is a multi-BTS, multi-band high power IMSI catcher

The IMSI catcher can be configured to support up to 16 base stations transmitting on any combination of up to 6 frequency bands simultaneously. Each frequency band utilizes highly filtered 25 Watts or 100 Watts power amplifiers. The IMSI catcher only requires a single wide-band antenna for operation. This simplifies the integration task and makes it possible for the system to be moved from one vehicle to another.

Each BTS can be configured dynamically and independently on any frequency and radio access technology supported by the baseband radios: GSM/GPRS/EDGE, CDMA2000, 3G or LTE-FDD/ TDD. The system offers frequency agility from 400MHz to 4 GHz on each radio.
The DT-MMS IMSI catcher includes: power amplification, filtering, cabling, antenna(s) and the multi-radio baseband unit. It is compatible with both portable use cases and vehicular applications, allowing for high operational flexibility in the field.

The IMSI catcher is offered in versatile configurations, including a rugged portable rack-mount enclosure that houses the 6U rack mount Transportable Amplification Unit and separate enclosure for one or two 3U half-width Portable Base Station Unit.


Portable Base Station Unit (PBU)


The PBU is at the core of the DT-MMS design. It is a multi-channel base station unit
that includes up to 8 base stations. Each radio is capable of supporting a 2G, 3G or
LTE (FDD and TDD) base station as well as monitoring the surrounding mobile networks.
The system is frequency agile and can support all cellular bands from 400MHz
to 4 GHz. The PBU can either be used as the radio source for the Transportable
Amplification Unit (TAU) when a larger coverage is required or with the lower power
Portable Amplification Unit (PAU) for short range operations.
DT-MMS


Transportable Amplification Unit (TAU)

The TAU is a high power multi-band radio front end that can amplify 
the output of one or two PBUs (up to 16 base stations) simultaneously. 
The TAU supports up to 6  frequency bands (FDD and
TDD) simultaneously. The peak output power per band can be  25 Watts 
or 100 Watts depending on the configuration. The system only requires a
single wide-band  antenna for cellular operation.
All transmit and receive bands are highly filtered and the status  of each power 
amplifier is constantly monitored and reported. The output power of each cell can be 
independently controlled via a graphical user interface.
MMS Catcher-1

This page was printed from the website
www.discoverytelecom.fi
Please check prices and availability of equipment.